STEP 1 – PRODUCT AGREEMENT AND CONSULTATION
This stage is at the very beginning of the home building process. The project manager for Midwest Screens will consult with the builder to review what products they want and their locations. The entire process will be explained and samples will be provided. We will also discuss best practices, and answer any questions the builder may have.
STEP 2 – FRAMING STAGE
This will entail a job-site visit to meet with the builder (if necessary), job superintendent, and framer(s). This meeting will discuss the framing needs for recessed screen cavities and access requirements for Phantom Executive Motorized Retractable Screens. We will also show where electrical outlets for power are to be placed. The photo below shows an example of the 7″ wide by 10″ tall cavity needed for an arch application.
STEP 3 – RECESSED TRACK HOUSING INSTALLATION
This task takes several hours depending on the number of screens and the complexity of installation. The purpose of the recessed track housing is to allow for the exterior material to be installed flush to the opening which will provide for the track to be recessed into the post. It is completed during the framing stage when headers/LVLs and load bearing posts are in place. The photo below shows an example of Phantom Screens recessed track housing mounted during the framing stage.
STEP 4 – FINAL MEASUREMENTS AND PRODUCT ORDERING
Midwest Screens’ project manager will obtain final measurements for product ordering purposes roughly 9 weeks out from completion of the home. Phantom Executive Motorized Retractable Screens are custom made for each opening to insure precise fit and function.
STEP 5 – INSTALLATION
The installation of Phantom Executive Motorized Retractable Screens is normally a 1 day process depending on the number of screens to be installed. This process involves the mounting of brackets, track insertion, hanging of roller, application of the mesh, fitting of slidebar, and all the necessary adjustments for proper installation.